Fix Your Maytag Dishwasher’s Drainage Issues

First, it’s important to understand that a dishwasher not draining is a common problem and can be caused by a variety of issues. Some of the most common causes of a Maytag dishwasher not draining include clogged filters, a faulty drain pump, or a malfunctioning dishwasher drain hose.

Signs of Your Maytag Dishwasher Isn’t Draining

There are several signs that your Maytag dishwasher may not be draining properly. Here are some common signs to look out for:

Standing Water in the Dishwasher

If you notice that there is water at the bottom of your dishwasher after a cycle has been completed, this is a clear sign that your dishwasher isn’t draining properly.

Dirty Dishes

If your dishes aren’t coming out clean after a cycle, this may be due to the Maytag dishwasher not draining properly. Dirty water can remain in the dishwasher, preventing the dishes from being washed effectively.

Unpleasant Odors

If your Maytag dishwasher isn’t draining properly, it can lead to unpleasant smells in your kitchen. Water that isn’t draining properly can cause food debris and bacteria to build up, leading to bad odors.

Noises Coming From the Dishwasher

If your dishwasher isn’t draining properly, it may start making unusual noises during a cycle. This could be due to the water struggling to drain properly.

Error Codes on the Dishwasher Display

Some Maytag dishwashers come with error codes that indicate a problem with draining. If you see an error code on the display, it’s important to refer to the manual to determine the cause of the problem.

If you notice any of these signs, it’s important to take action to fix the problem as soon as possible. Failure to address a drainage problem in your Maytag dishwasher can lead to more serious issues over time.

Maytag Dishwasher Isn’t Draining and How to Fix It

Here are some steps you can take to troubleshoot and fix the problem:

Make Sure the Correct installation

If the dishwasher was not installed correctly, it can cause problems with draining. Check the installation manual to make sure that your Maytag dishwasher was installed according to the manufacturer’s specifications.

Check the Dishwasher Filter

A clogged dishwasher filter can prevent the water from draining properly. To check the filter, remove the bottom dish rack and look for the filter at the bottom of the dishwasher. If the filter is dirty or clogged, remove it and clean it

Check the Dishwasher Drain Pump

A faulty drain pump can also cause the dishwasher not to drain properly. To check the drain pump, you will need to access the pump from the bottom of your Maytag dishwasher. Turn off the power to the dishwasher and disconnect it from the water supply.

Then remove the bottom panel of the dishwasher to access the drain pump. Check the pump for any blockages or damage. If you find any, remove them and try running the dishwasher again.

Check the Dishwasher Drain Hose

The dishwasher drain hose is responsible for carrying water out of the dishwasher and into the sink or garbage disposal. If the drain hose is clogged or damaged, it can prevent the water from draining properly.

To check the drain hose, you will need to locate it at the back of the Maytag dishwasher and inspect it for any kinks, twists, or blockages. If you find any issues, you will need to replace the drain hose.

Check the Dishwasher Garbage Disposal

If your Maytag dishwasher is connected to garbage disposal, make sure that the disposal is not clogged or blocked. Run water through the disposal to see if it drains properly. If the disposal is clogged, you will need to clear the blockage before running the dishwasher again.

Check the Dishwasher Air Gap

The dishwasher air gap is a device that prevents wastewater from flowing back into the dishwasher. If the air gap is blocked or clogged, it can prevent your Maytag dishwasher from draining properly. To check the air gap, remove the cap and clean any debris or blockages.

Check the Dishwasher Spray Arm

The spray arm is responsible for spraying water onto the dishes to clean them. If the spray arm is clogged or blocked, it can prevent the water from draining properly. Remove the spray arm and clean any debris or blockages.

Check the Dishwasher Check Valve

The check valve is responsible for preventing wastewater from flowing back into the dishwasher after it has drained. If the check valve is faulty, it can cause the dishwasher not to drain properly. Check the valve for any blockages or damage, and replace it if necessary.

Malfunctioning Timer or Control Board

The timer or control board in your Maytag dishwasher controls the various cycles and functions of the dishwasher. If the timer or control board is malfunctioning, it can cause the dishwasher not to drain properly.

Check the timer or control board for any signs of damage or wear, and replace it if necessary.

Run a Dishwasher Cycle With Vinegar

After following the above steps, you can run a cycle for cleaning. Vinegar is a natural cleaning agent that can help remove any build-up or debris in the dishwasher.

Simply add a cup of white vinegar to the bottom of your Maytag dishwasher and run a cycle on the hottest setting.

Final Thoughts

With a little bit of effort, you can get your Maytag dishwasher back to working properly and enjoy clean, spotless dishes once again! It is important to clean your Maytag dishwasher regularly to ensure that it runs smoothly and prevents drain issues.

Frequently Asked Questions

Here are some frequently asked questions and their answers to your Maytag dishwasher’s drainage problems.